Avenview TV Cables 677 011 User Manual

DisplayPort Extender over  
Fiber Optic Cable  
Model #: FO-DP-XX-MM  
© 2010 Avenview Inc. All rights reserved.  
The contents of this document are provided in connection with Avenview Inc. (“Avenview”) products. Avenview makes no representations or warranties with  
respect to the accuracy or completeness of the contents of this publication and reserves the right to make changes to specifications and product descriptions at any  
time without notice. No license, whether express, implied, or otherwise, to any intellectual property rights is granted by this publication. Except as set forth in  
Avenview Standard Terms and Conditions of Sale, Avenview assumes no liability whatsoever, and disclaims any express or implied warranty, relating to its products  
including, but not limited to, the implied warranty of merchantability, fitness for a particular purpose, or infringement of any intellectual property right.  
Reproduction of this manual, or parts thereof, in any form, without the express written permission of Avenview Inc. is strictly prohibited.  
 
Section 1: Getting Started  
1.1 Important Safeguards  
Please read all of these instructions carefully before you use the device. Save this manual for future  
reference.  
What the warranty does not cover  
Any product, on which the serial number has been defaced, modified or removed.  
Damage, deterioration or malfunction resulting from:  
Accident, misuse, neglect, fire, water, lightning, or other acts of nature, unauthorized  
product modification, or failure to follow instructions supplied with the product.  
Repair or attempted repair by anyone not authorized by us.  
Any damage of the product due to shipment.  
Removal or installation of the product.  
Causes external to the product, such as electric power fluctuation or failure.  
Use of supplies or parts not meeting our specifications.  
Normal wear and tear.  
Any other causes which does not relate to a product defect.  
Removal, installation, and set-up service charges.  
1.2 Safety Instructions  
The Avenview FO-DP-XX-MM, DisplayPort Extender System over Fiber Optic, has been tested for conformance  
to safety regulations and requirements, and has been certified for international use. However, like all  
electronic equipment’s, the FO-DP-XX-MM should be used with care. Read the following safety instructions to  
protect yourself from possible injury and to minimize the risk of damage to the unit.  
Do not dismantle the housing or modify the module.  
Dismantling the housing or modifying the module may result in electrical shock or burn.  
Refer all servicing to qualified service personnel.  
Do not attempt to service this product yourself as opening or removing housing may expose you to  
dangerous voltage or other hazards  
Keep the module away from liquids.  
Spillage into the housing may result in fire, electrical shock, or equipment damage. If an object or liquid  
falls or spills on to the housing, unplug the module immediately.  
Have the module checked by a qualified service engineer before using it again.  
Do not use liquid or aerosol cleaners to clean this unit. Always unplug the power to the device before  
cleaning.  
3
 
     
1.3 Regulatory Notices Federal Communications Commission (FCC)  
This equipment has been tested and found to comply with Part 15 of the FCC rules. These limits are designed  
to provide reasonable protection against harmful interference in a residential installation.  
Any changes or modifications made to this equipment may void the user’s authority to operate this  
equipment.  
1.4 Introduction  
Avenview FO-DP-XX-MM Series with fiber optic cable system lets you extend DisplayPort digital signal up to 65  
meters (210 feet) at WQXGA (2560x1600) resolution.  
-
-
-
-
-
-
-
High Speed and long distance transmission by Optical fiber  
Compatible with DisplayPort standard v1.1a  
HBR(High Bit Rate) Cable Assembly (up to 2.7Gbs Data Rate)  
Use Extender Power  
Supports up to WQXGA (2560 x 1600) resolution  
AUX and Hot-Plug channels are transmitted by copper line  
DPCP & HDCP compliant(DPCP & HDCP are not part of the DisplayPort standard)  
1.5 Model Description  
FO-DP-XX-MM  
Model Name  
Length in Meters (5 = 5 meters, 10 = 10 meters)  
1.6 Package Contents  
Before you start the installation of the converter, please check the package contents.  
-
-
-
DisplayPort Extender Cable with Transmitter and Receiver  
5V 2A Power Adapter  
x 1  
x 1  
x 1  
User’s Manual  
4
 
       
1.7 Before Installation  
Put the product in an even and stable location. If the product falls down or drops, it may cause an  
injury or malfunction.  
Don’t place the product in too high temperature (over 50°C), too low temperature (under 0°C) or high  
humidity.  
Use the DC power adapter with correct specifications. If inappropriate power supply is used then it  
may cause a fire.  
Do not twist or pull by force ends of the optical cable. It can cause malfunction.  
5
 
 
1.8 Installation  
Avenview FO-DP-XX-MM is composed of a Transmitter converting the graphic signal of a computer to optical  
and Optical Fiber propagating the optical signal and Receiver supplying electrical signal to monitor converted  
from the optical signal to electrical signal. The Transmitter should be connected to computer/media player  
DisplayPort connector and the Receiver should be connected to a monitor/TV with DisplayPort connector.  
Avenview FO-DP-xx-MM is designed to self-detect the resolution of the monitor and change the resolution  
accordingly. Follow these steps for connecting to a device:  
1. Power on your display  
2. Connect Transmitter to the PC and Receiver to the Display.  
3. Connect the optical fiber between Transmitter and Receiver.  
4. Restart the computer or media player.  
Use the provided 5V 2Amp Power Adapter or you may not get any signal on Monitor/TV.  
Do not twist or pull by force the both ends of the optical cable. It may cause malfunction  
6
 
 
Section 2: Specifications  
Item  
Description  
FO-DP-XX-MM (Transmitter)  
DisplayPort Fiber Optic Transmitter  
10bit Deep Color / 60Hz  
Up to WQXGA 2560 x 1600 @ 65 meters ( 210 feet)  
FO-DP-XX-MM (Receiver)  
Units  
DisplayPort Fiber Optic Receiver  
Unit Description  
Video Bandwidth  
Supported Resolution &  
Distance  
4 ch 850 nm Multi-Mode VCSEL  
20 pin DisplayPort Plug (Male)  
4 ch GaAs PIN photo Diode  
Optical Converter  
20 pin DisplayPort Plug (Female)  
Connector Type  
50/125 µm Multi-mode glass fiber  
Fiber Type  
Environmental  
32˚ ~ 104˚F (0˚ to 40˚C)  
-4˚ ~ 140˚F (-20˚ ~ 60˚C)  
Operating Temperature  
Storage Temperature  
Relative Humidity  
20~90% RH (no condensation)  
2.1 Electrical & Optical Specifications  
2.1.1 Transmitter (Source) Module  
Parameter  
Symbol  
Min  
Type  
Max  
Units  
Supply Voltage  
Supply Current  
Power Dissipation  
Diff. P-to-P Input Level 1  
Diff. P-to-P Input Level 2  
Diff. P-to-P Input Level 3  
Diff. P-to-P Input Level 4  
TX DC Common Mode  
TX AC Common Mode  
Vcc  
Icc  
Po  
+5.0  
250  
1.25  
0.4  
0.6  
0.8  
V
mA  
W
V
V
V
V
V
mV  
Power  
Signal  
VTX-DIFF-PP1  
VTX-DIFF-PP2  
VTX-DIFF-PP3  
VTX-DIFF-PP4  
VTX-DC-CM  
VTX-AC-CM  
0.34  
0.51  
0.69  
1.02  
0
0.46  
0.68  
0.92  
1.38  
2.0  
1.2  
20  
Transmitter (Source) module of Model DPM includes 4 channel VCSEL (Vertical Surface Emitting Laser Diode)  
with 850 nm invisible laser radiation.  
Transmitter (Source) module of DPM is Class 1 Laser Product.  
7
 
     
2.1.2 Receiver Module  
Parameter  
Symbol  
Vcc  
Min  
Type  
+5.0  
280  
Max  
Units  
V
mA  
W
Supply Voltage  
Supply Current  
Power Dissipation  
Icc  
Po  
Power  
Signal  
1.4  
Diff. P-to-P Output Level 1  
Diff. P-to-P Output Level 2  
RXDAC Common Mode  
VTX-DIFF-PP-H  
VTX-DIFF-PPR  
VTX-DC-CM  
120  
40  
0
0.46  
0.68  
20  
mV  
mV  
V
2.2 Connector Pin Assignment  
2.2.1 Transmitter (Male)  
Pin  
Pin Name  
Pin  
2
Pin Name  
ML_Lane0(p)  
GND  
1
3
5
7
9
ML_Lane0(n)  
GND  
ML_Lane1(p)  
ML-Lane1(n)  
GND  
4
6
ML-Lane2(p)  
ML_Lane2(n)  
GND  
8
ML_Lane3(p)  
ML_Lane3(n)  
CONFIG2  
10  
12  
14  
16  
18  
20  
11  
13  
15  
17  
19  
CONFIG1  
AUX_CH(p)  
AUX_CH(n)  
Return  
GND  
Hot Plug Detect  
No Connect(DP_PWR)  
2.2.2 Receiver (Female)  
Pin Pin Name  
Pin  
2
Pin Name  
1
ML_Lane3(n)  
GND  
ML_Lane2(n)  
ML-Lane2(p)  
GND  
3
5
ML_Lane3(p)  
GND  
4
6
7
ML-Lane1(n)  
ML_Lane1(p)  
GND  
8
9
10  
12  
14  
16  
18  
20  
ML_Lane0(n)  
ML_Lane0(p)  
CONFIG2  
11  
13  
15  
17  
19  
CONFIG1  
AUX_CH(p)  
AUX_CH(n)  
Return  
GND  
Hot Plug Detect  
No Connect(DP_PWR)  
8
 
       
2.3 Mechanical Specifications  
2.3.1 Case Dimensions  
9
 
   
2.3.2 Optical Cable Info  
Dimensions of DisplayPort Cable  
Items  
Unit  
-
mm(AWG)  
Specifications  
Layer Stranding  
-0.203/7 (24)  
A helically  
DisplayPort Cable Make-up  
Drain Wires (Size/Stranded)  
AL-Mylar Screen Shield  
Cable Outer Diameter  
Jacket Color  
-
Mm  
-
7.40 ± 0.20  
Black  
Fiber Cable Characteristics  
Item  
Spec  
-20 ~ 70  
0 ~ 50  
245  
Unit  
Condition  
Spooled  
-
Storage Temperature  
Operational Test  
Max. Tensile Load  
Min. Radius Bend  
°C  
°C  
N
25  
40  
mm  
Crush Resistance  
490  
N/50mm  
10  
 
 
Disclaimer  
While every precaution has been taken in the preparation of this document, Avenview Inc. assumes no liability with respect to the  
operation or use of Avenview hardware, software or other products and documentation described herein, for any act or omission of  
Avenview concerning such products or this documentation, for any interruption of service, loss or interruption of business, loss of  
anticipatory profits, or for punitive, incidental or consequential damages in connection with the furnishing, performance, or use of the  
Avenview hardware, software, or other products and documentation provided herein.  
Avenview Inc. reserves the right to make changes without further notice to a product or system described herein to improve reliability,  
function or design. With respect to Avenview products which this document relates, Avenview disclaims all express or implied warranties  
regarding such products, including but not limited to, the implied warranties of merchantability, fitness for a particular purpose, and  
non-infringement.  
11  
 

8e6 Technologies Computer Hardware MSA 004 005 User Manual
Agilent Technologies Network Card J6800A User Manual
Agilent Technologies Satellite Radio E4406A User Manual
Agilent Technologies Yard Vacuum 437B User Manual
Akai CRT Television CT 2108APF User Manual
Allied Telesis Network Card AT iMG646MOD User Manual
Allied Telesis Switch AlliedWare Plus User Manual
Amana Range W10180837A User Manual
Audiovox Stereo Amplifier XTM 600 User Manual
Axis Communications Security Camera P5512 User Manual