Avenview TV Cables C COMPVGA HDM User Manual

Component / VGA with Audio to HDMI Converter  
Model #: C-COMPVGA-HDM  
© 2010 Avenview Inc. All rights reserved.  
The contents of this document are provided in connection with Avenview Inc. (“Avenview”) products. Avenview makes no representations or warranties with  
respect to the accuracy or completeness of the contents of this publication and reserves the right to make changes to specifications and product descriptions at any  
time without notice. No license, whether express, implied, or otherwise, to any intellectual property rights is granted by this publication. Except as set forth in  
Avenview Standard Terms and Conditions of Sale, Avenview assumes no liability whatsoever, and disclaims any express or implied warranty, relating to its products  
including, but not limited to, the implied warranty of merchantability, fitness for a particular purpose, or infringement of any intellectual property right.  
Reproduction of this manual, or parts thereof, in any form, without the express written permission of Avenview Inc. is strictly prohibited.  
 
Section 1: Getting Started  
1.1 Important Safeguards  
Please read all of these instructions carefully before you use the device. Save this manual for future  
reference.  
What the warranty does not cover  
Any product, on which the serial number has been defaced, modified or removed.  
Damage, deterioration or malfunction resulting from:  
Accident, misuse, neglect, fire, water, lightning, or other acts of nature, unauthorized  
product modification, or failure to follow instructions supplied with the product.  
Repair or attempted repair by anyone not authorized by us.  
Any damage of the product due to shipment.  
Removal or installation of the product.  
Causes external to the product, such as electric power fluctuation or failure.  
Use of supplies or parts not meeting our specifications.  
Normal wear and tear.  
Any other causes which does not relate to a product defect.  
Removal, installation, and set-up service charges.  
1.2 Safety Instructions  
The Avenview C-COMPVGA-HDM, Component with Audio to HDMI Converter has been tested for  
conformance to safety regulations and requirements, and has been certified for international use. However,  
like all electronic equipment’s, the C-COMPVGA-HDM should be used with care. Read the following safety  
instructions to protect yourself from possible injury and to minimize the risk of damage to the unit.  
Do not dismantle the housing or modify the module.  
Dismantling the housing or modifying the module may result in electrical shock or burn.  
Refer all servicing to qualified service personnel.  
Do not attempt to service this product yourself as opening or removing housing may expose you to  
dangerous voltage or other hazards  
Keep the module away from liquids.  
Spillage into the housing may result in fire, electrical shock, or equipment damage. If an object or liquid  
falls or spills on to the housing, unplug the module immediately.  
Have the module checked by a qualified service engineer before using it again.  
Do not use liquid or aerosol cleaners to clean this unit. Always unplug the power to the device before  
cleaning.  
3
 
     
1.3 Regulatory Notices Federal Communications Commission (FCC)  
This equipment has been tested and found to comply with Part 15 of the FCC rules. These limits are designed  
to provide reasonable protection against harmful interference in a residential installation.  
Any changes or modifications made to this equipment may void the user’s authority to operate this  
equipment.  
1.4 Introduction  
Avenview C-COMPVGA-HDM, Component / VGA with Audio to HDMI Converter provides an easy and instant  
approach for converting Component (YPbPr) and/or VGA with either digital S/PDIF or analog stereo audio to  
HDMI. With C-COMPVGA-HDM converter, Component and/or VGA based devices such as PC, set-top-boxes  
can connect to HDMI TV or projector at low cost.  
-
-
-
-
-
-
-
HDMI 1.2a compliant  
Support VGA resolution of up to UXGA (1600x1200 or WUXGA (1920x1200)  
Supports HD (1080i / 720p) component video  
Coaxial S/PDIF audio input  
Stereo analog audio input  
Front panel LED indicators  
Easy installation  
4
 
   
1.5 Package Contents  
Before you start the installation of the converter, please check the package contents.  
-
-
-
C-COMPVGA-HDM  
Power Adapter (+5VDC, 2A)  
User’s Manual  
x 1  
x 1  
x 1  
5
 
 
1.6 Before Installation  
Put the product in an even and stable location. If the product falls down or drops, it may cause an  
injury or malfunction.  
Don’t place the product in too high temperature (over 50°C), too low temperature (under 0°C) or high  
humidity.  
Use the DC power adapter with correct specifications. If inappropriate power supply is used then it  
may cause a fire.  
Do not twist or pull by force ends of the optical cable. It can cause malfunction.  
6
 
 
1.7 Panel Description  
1.7.1 Front Panel  
1
2 3  
4
1. S/PDIF IN  
3. Component or VGA IN  
2. STEREO IN  
4. Component or VGA Select Button  
1.7.2 Rear Panel  
1
2
3
4
1. Mode Switch  
3. Power Indicator  
2. HDMI OUT  
4. 5V DC Power Jack  
1.7.3 DIP Switch  
PIN #  
Mode  
OFF  
ON   
OFF   
ON   
Reset to Factory default EDID  
Learn & store connected monitor’s EDID  
Analog Audio Input  
1
1
2
2
S/PDIF Audio Input  
7
 
       
1.8 Installation  
To setup Avenview C-COMPVGA-HDM follow these steps for connecting to a device:  
1. Power off display source such as DVD Player, Set-top box, PC etc.  
2. Connect VGA or Component source to the video input  
3. Connect S/PDIF or Stereo Audio source to RCA Jack or 3.5mm Jack  
4. Connect VGA/Component Adapter to VGA or Component input of the device  
5. Connect HDMI cable to device and TV or projector  
6. Plug in 5V DC power cord to power jack of C-HDM-COMPVGA  
7. Power on C-COMPVGA-HDM converter  
8. Power on VGA / Component source and display with HDMI input.  
S/PDIF format is dependent on the embedded digital audio part in the HDMI stream. The S/PDIF  
receiver must be able to recognize the input S/PDIF format. C-HDM-DVIA only separates the  
digital audio in HDMI stream and bypasses this decoded audio to the output.  
This version does NOT support 8 Channel analog audio applications  
S/PDIF audio input can support 2 out of 8 channel audio inputs. S/PDIF audio only supports 48  
KHz audio sample rate.  
8
 
 
Section 2: Specifications  
Item  
Description  
C-COMPVGA-HDM  
Component/VGA with Audio to HDMI Converter  
HDMI 1.2a  
Units  
Unit Description  
HDMI Compliance  
Video Bandwidth  
165MHz (4.95Gbps)  
Single Link: 1080p 60, WUXGA (1920x1200@60Hz)  
Component Video: 720p / 1080i  
Video Support  
Stereo Audio  
Audio Support  
1.2 Volts (peak-to-peak)  
5 Volts (peak-to-peak, TTL)  
Output Video Signal  
Output DDC Signal  
1 x VGA  
1 x RCA  
Input  
1 x 3.5mm  
HDMI x 1  
Type A (19 pin female)  
HD-15 (15-pin D-sub female)  
Coaxial S/PDIF Digital Audio (PCM 48kHz)  
Analog Stereo Audio  
5” X 4” x 1”  
Output  
HDMI Connector  
VGA Connector  
RCA Connector  
3.5mm Audio Connector  
Dimensions (L x W x H)  
Power Supply  
5V 2A DC  
4 Watts (max)  
Power Consumption  
Environmental  
32˚ ~ 104˚F (0˚ to 40˚C)  
-4˚ ~ 140˚F (-20˚ ~ 60˚C)  
Operating Temperature  
Storage Temperature  
Relative Humidity  
20~90% RH (no condensation)  
9
 
 
2.1 Supported Resolutions  
2.1.1 VGA  
Supported Mode  
Resolution  
Supported Mode  
Resolution  
1152x864 @60Hz  
1152x864 @75Hz  
1152x864 @55Hz  
1280x768 @60Hz  
1280x768 @75Hz  
1280x768 @85Hz  
1280x960 @60Hz  
1280x960 @85Hz  
1280x1024 @60Hz  
1280x1024 @85Hz  
1600x1200 @60Hz  
1920x1200 @60Hz  
VESA  
VESA  
VESA  
VESA  
VESA  
VESA  
VESA  
VESA  
VESA  
VESA  
VESA  
VESA  
VESA  
640x400 @85Hz  
720x400 @85Hz  
640x480 @60Hz  
640x480 @72Hz  
640x480 @75Hz  
640x480 @85Hz  
800x600 @60Hz  
800x600 @72Hz  
800x600 @75Hz  
800x600 @85Hz  
1024x768 @60Hz  
1024x768 @75Hz  
1024x768 @85Hz  
VESA  
VESA  
VESA  
VESA  
VESA  
VESA  
VESA  
VESA  
VESA  
VESA  
VESA  
VESA  
2.1.2 Component Video (YPbPr)  
Supported Mode  
Resolution  
EIA  
EIA  
EIA  
EIA  
NTSC  
PAL  
720x480p @59.94 (60)Hz  
720x576p @ 50Hz  
1280x720p @59.94 (60)Hz  
1920x1080i @59.94 (60)Hz  
712x484  
702x574  
10  
 
     
Notice  
1. Only HDMI enabled TV sets with under-scan/over-scan support, the full active video can be accurately  
displayed. Some HDMI equipped TV sets may not support this feature. If under-scan/over-scan* is NOT  
supported, the top, bottom, left and right border of the active video may be screened, and the S/PDIF  
audio may not sound right.  
2. Analog stereo audio can merely support 2-channel audio. This version does NOT support 8-channel  
analog audio applications.  
3. S/PDIF audio input supports the main 2-channel audio input  
4. S/PDIF supports only 48kHz audio sample rate. Other than this rate, the input digital audio should be  
adjusted to 48kHz in order to get audio signal correctly sent.  
The under-scan mode displays the full video frame, which reveals content on the edge that is recorded.  
In overs-can, the field monitor zooms in to the area that would be visible on most televisions.  
Set the field monitor to under-scan if your video will be viewed on a computer monitor or shown with a  
projector and also to look for light stands, microphones, and other unwanted objects on the edges of  
your shot. Set it to over-scan to see how the video will look on a television.  
11  
 
Disclaimer  
While every precaution has been taken in the preparation of this document, Avenview Inc. assumes no liability with respect to the  
operation or use of Avenview hardware, software or other products and documentation described herein, for any act or omission of  
Avenview concerning such products or this documentation, for any interruption of service, loss or interruption of business, loss of  
anticipatory profits, or for punitive, incidental or consequential damages in connection with the furnishing, performance, or use of the  
Avenview hardware, software, or other products and documentation provided herein.  
Avenview Inc. reserves the right to make changes without further notice to a product or system described herein to improve reliability,  
function or design. With respect to Avenview products which this document relates, Avenview disclaims all express or implied warranties  
regarding such products, including but not limited to, the implied warranties of merchantability, fitness for a particular purpose, and  
non-infringement.  
12  
 

3M Refrigerator 37000 User Manual
Adams Postal Equipment WBZ 15a KG User Manual
AEG Dishwasher 88009 User Manual
Agri Fab Power Roller 45 02163 User Manual
Alesis Microphone AM3 User Manual
Alpine DVD Player IVA W502E User Manual
AltiGen comm Network Router 6 2008 4510 0001 60 User Manual
Alto Shaam Refrigerator mobile refigerated cart double comopartment User Manual
Axis Communications Security Camera T8123 E User Manual
Eureka Tents Vacuum Cleaner 79 SERIES User Manual