Avenview TV Cables FO 4LC xxM Series User Manual

FO-4LC-xxM Series  
User’s Guide  
FO-4LC-xxM Series  
© 2008 Avenview Inc. All rights reserved.  
The contents of this document are provided in connection with Avenview Inc. (“Avenview”) products. Avenview makes no representations  
or warranties with respect to the accuracy or completeness of the contents of this publication and reserves the right to make changes to  
specifications and product descriptions at any time without notice. No license, whether express, implied, or otherwise, to any intellectual  
property rights is granted by this publication. Except as set forth in Avenview Standard Terms and Conditions of Sale, Avenview assumes  
no liability whatsoever, and disclaims any express or implied warranty, relating to its products including, but not limited to, the implied  
warranty of merchantability, fitness for a particular purpose, or infringement of any intellectual property right.  
Reproduction of this manual, or parts thereof, in any form, without the express written permission of Avenview Inc. is strictly  
1
 
Section 1: Getting Started  
1.1 Important Safeguards  
Please read all of these instructions carefully before you use the device. Save this manual for future  
reference.  
What the warranty does not cover  
Any product, on which the serial number has been defaced, modified or removed.  
Damage, deterioration or malfunction resulting from:  
Accident, misuse, neglect, fire, water, lightning, or other acts of nature, unauthorized  
product modification, or failure to follow instructions supplied with the product.  
Repair or attempted repair by anyone not authorized by us.  
Any damage of the product due to shipment.  
Removal or installation of the product.  
Causes external to the product, such as electric power fluctuation or failure.  
Use of supplies or parts not meeting our specifications.  
Normal wear and tear.  
Any other causes which does not relate to a product defect.  
Removal, installation, and set-up service charges.  
3
 
   
1.2 Safety Instructions  
Do not dismantle the housing or modify the module.  
Dismantling the housing or modifying the module may result in electrical shock or burn.  
Refer all servicing to qualified service personnel.  
Do not attempt to service this product yourself as opening or removing housing may expose you to  
dangerous voltage or other hazards  
Keep the module away from liquids.  
Spillage into the housing may result in fire, electrical shock, or equipment damage. If an object or liquid  
falls or spills on to the housing, unplug the module immediately.  
Have the module checked by a qualified service engineer before using it again.  
1.3 Regulatory Notices Federal Communications Commission (FCC)  
This equipment has been tested and found to comply with Part 15 of the FCC rules. These limits are designed  
to provide reasonable protection against harmful interference in a residential installation.  
Any changes or modifications made to this equipment may void the user’s authority to operate this  
equipment.  
1.4 Introduction  
Avenview FO-4LC-xxM Series with fiber optic cable system lets you extend single link digital signal up to 1000  
meters (3300 feet).  
-
-
-
-
-
-
-
High Speed and long distance transmission by LC type Multi-Mode fiber  
Uses 7 strand multi-mode LC fiber optic cable  
Supports both Single link and Dual link by selectable function switch  
R, G, B, Clock signal is transmitted separately by Multi-Mode optical Fiber  
Supports up to WUXGA (1920 x 1200) resolution  
Self detecting function for EDID  
Optional external power supply (Automatic Power switch is included)  
1.5 Package Contents  
Before you start the installation of the converter, please check the package contents.  
-
-
-
-
Transmitter x 1 pc  
Receiver x1 pc  
Power Adapter (5VDC, 2A)  
User’s Manual  
4
 
       
1.6 Before Installation  
Put the product in an even and stable location. If the product falls down or drops, it may cause an  
injury or malfunction.  
Don’t place the product in too high temperature (over 50°C), too low temperature (under 0°C) or high  
humidity.  
Use the DC power adapter with correct specifications. If inappropriate power supply is used then it  
may cause a fire.  
Do not twist or pull by force ends of the optical cable. It can cause malfunction.  
1.7 Installation  
Avenview FO-4LC-xxM is composed of a transmitter and a receiver. The Transmitter should be connected to  
the computer’s DVI Port and the Receiver should be connected the DVI Port of the digital display device.  
Avenview FO-4LC-xxM Transmitter is designed to be used with the LC type standard optical cable. It is marked  
with R, G, B, O connect. Rto the Red Color optical cable, Gto the Green, Bto Blue and Oto Orange  
Avenview FO-4LC-xxM is designed to self detect the resolution of the monitor and change the resolution  
accordingly. Follow these steps for connecting to a device:  
1. Power on your display  
2. Connect Transmitter to the DVI of display  
3. Plug the DC power of Transmitter  
4. Pull out after about 5 10 seconds for reading the EDID information from the display  
5. Connect Transmitter to the PC and Receiver to the Display.  
6. At the same time, connect DC power to the receiver  
7. Connect the optical fiber between Transmitter and Receiver.  
8. Restart the computer.  
Use the DC adapter (included in the package) for the Receiver. The Transmitter which is  
connected to a computer uses power from the computer.  
5
 
   
1.8 General Troubleshooting  
Problem  
Possible Solution  
Check if the PC Power is on  
Check if connection to the computer and the monitor are  
correct.  
No Image  
Check the optical fiber connection  
Turn the PC Power off and on again.  
This product supports up to WUXGA resolution.  
Check the maximum resolution range of the graphics card.  
Screen Defects Appear  
6
 
 
Section 2: Specifications  
Item  
Description  
Video Bandwidth  
Connector  
1.65Gbps (Single Link)  
DVI 24Pin Plug and LC Connector  
Power Consumption  
0.75 Watt (max)  
1280x1024 @ 700m (2300 ft)  
1600x1200 @ 500m (1650 ft)  
1920x1200 @ 300m (1000 ft)  
Maximum Resolution  
Optical  
Optical Source  
O/E Converter  
Fiber Type  
Environmental  
Operation  
850nm VCSEL  
PIN Photo Diode  
50/125 or 62.5/125 LC Multi-Mode Fiber  
0˚ to 50˚C Degree  
Storage  
-20˚ to 70˚C Degree  
2.1 Signal Pin Assignment  
Transmitter  
Pin  
Signal Assignment  
T.M.D.S. Data2-  
T.M.D.S. Data2+  
T.M.D.S. Data2 Shield  
No Connect  
Pin  
9
Signal Assignment  
T.M.D.S. Data1-  
T.M.D.S. Data1+  
T.M.D.S. Data1 Shield  
No Connect  
Pin  
17  
18  
19  
20  
21  
22  
23  
24  
Signal Assignment  
T.M.D.S. Data0-  
T.M.D.S. Data0+  
T.M.D.S. Data0 Shield  
No Connect  
1
2
10  
11  
12  
13  
14  
15  
16  
3
4
5
No Connect  
No Connect  
No Connect  
6
DDC Clock  
+5V Power  
T.M.D.S. Clock Shield  
T.M.D.S. Clock+  
T.M.D.S. Clock-  
7
DDC Data  
Ground (for +5V)  
No Connect  
8
No Connect  
Receiver  
Pin  
1
Signal Assignment  
T.M.D.S. Data2-  
T.M.D.S. Data2+  
T.M.D.S. Data2 Shield  
No Connect  
Pin  
9
Signal Assignment  
T.M.D.S. Data1-  
T.M.D.S. Data1+  
T.M.D.S. Data1 Shield  
No Connect  
Pin  
17  
18  
19  
20  
21  
22  
23  
24  
Signal Assignment  
T.M.D.S. Data0-  
T.M.D.S. Data0+  
T.M.D.S. Data0 Shield  
No Connect  
2
10  
11  
12  
13  
14  
15  
16  
3
4
5
No Connect  
No Connect  
No Connect  
6
Not Connect  
+5V Power  
T.M.D.S. Clock Shield  
T.M.D.S. Clock+  
T.M.D.S. Clock-  
7
Not Connect  
Ground (for +5V)  
No Connect  
8
No Connect  
7
 
   
Disclaimer  
While every precaution has been taken in the preparation of this document, Avenview Inc. assumes no liability with respect to the  
operation or use of Avenview hardware, software or other products and documentation described herein, for any act or omission of  
Avenview concerning such products or this documentation, for any interruption of service, loss or interruption of business, loss of  
anticipatory profits, or for punitive, incidental or consequential damages in connection with the furnishing, performance, or use of the  
Avenview hardware, software, or other products and documentation provided herein.  
Avenview Inc. reserves the right to make changes without further notice to a product or system described herein to improve reliability,  
function or design. With respect to Avenview products which this document relates, Avenview disclaims all express or implied warranties  
8
 
regarding such products, including but not limited to, the implied warranties of merchantability, fitness for a particular purpose, and  
non-infringement.  
9
 

Acnodes Computer Monitor APH 9220 User Manual
ADTRAN Power Supply 6 Amp Power User Manual
ADTRAN Telephone ADP 40 User Manual
Advantech Computer Monitor SPC 57 User Manual
AEG Modem PROTECT A 500 User Manual
American Power Conversion Switch MasterSwitch User Manual
Atlona Car Amplifier AT VGA18 User Manual
Atlona Telephone AT HDTX RSNET User Manual
Axor Indoor Furnishings 34134001 User Manual
Baldor Automobile Parts S12H Y2PTAW 1 User Manual