Avenview TV Cables FO HDM 1000M EMI User Manual

HDMI Extender SET over Single Fiber  
Optic Cable with EMI Shielding  
Model #: FO-HDM-1000M-EMI  
© 2010 Avenview Inc. All rights reserved.  
The contents of this document are provided in connection with Avenview Inc. (“Avenview”) products. Avenview makes no representations or warranties with  
respect to the accuracy or completeness of the contents of this publication and reserves the right to make changes to specifications and product descriptions at any  
time without notice. No license, whether express, implied, or otherwise, to any intellectual property rights is granted by this publication. Except as set forth in  
Avenview Standard Terms and Conditions of Sale, Avenview assumes no liability whatsoever, and disclaims any express or implied warranty, relating to its products  
including, but not limited to, the implied warranty of merchantability, fitness for a particular purpose, or infringement of any intellectual property right.  
Reproduction of this manual, or parts thereof, in any form, without the express written permission of Avenview Inc. is strictly prohibited.  
 
Section 1: Getting Started  
1.1 Important Safeguards  
Please read all of these instructions carefully before you use the device. Save this manual for future  
reference.  
What the warranty does not cover  
Any product, on which the serial number has been defaced, modified or removed.  
Damage, deterioration or malfunction resulting from:  
Accident, misuse, neglect, fire, water, lightning, or other acts of nature, unauthorized  
product modification, or failure to follow instructions supplied with the product.  
Repair or attempted repair by anyone not authorized by us.  
Any damage of the product due to shipment.  
Removal or installation of the product.  
Causes external to the product, such as electric power fluctuation or failure.  
Use of supplies or parts not meeting our specifications.  
Normal wear and tear.  
Any other causes which does not relate to a product defect.  
Removal, installation, and set-up service charges.  
1.2 Safety Instructions  
The Avenview FO-HDM-1000M-EMI, HDMI Extender SET over Single Fiber Optic, has been tested for  
conformance to safety regulations and requirements, and has been certified for international use. However,  
like all electronic equipment’s, the FO-HDM-1000M-EMI should be used with care. Read the following safety  
instructions to protect yourself from possible injury and to minimize the risk of damage to the unit.  
Do not dismantle the housing or modify the module.  
Dismantling the housing or modifying the module may result in electrical shock or burn.  
Refer all servicing to qualified service personnel.  
Do not attempt to service this product yourself as opening or removing housing may expose you to  
dangerous voltage or other hazards  
Keep the module away from liquids.  
Spillage into the housing may result in fire, electrical shock, or equipment damage. If an object or liquid  
falls or spills on to the housing, unplug the module immediately.  
Have the module checked by a qualified service engineer before using it again.  
Do not use liquid or aerosol cleaners to clean this unit. Always unplug the power to the device before  
cleaning.  
3
 
     
1.3 Regulatory Notices Federal Communications Commission (FCC)  
This equipment has been tested and found to comply with Part 15 of the FCC rules. These limits are designed  
to provide reasonable protection against harmful interference in a residential installation.  
Any changes or modifications made to this equipment may void the user’s authority to operate this  
equipment.  
1.4 Introduction  
Avenview FO-HDM-1000M-EMI optical HDMI extension module, is designed to let digital flat panel display  
extend over 1000 meters away from host based on HDMI standard by optical transmission technology. Its  
small package and transmit up to four video and one low-speed lane, while simultaneously receiving one  
low-speed signal, all on one multimode fiber.  
-
-
-
-
-
-
-
-
-
High Speed and long distance transmission by 1 channel SC type Multi-mode Fiber  
Supports resolution up to HDTV/1080P, PC/WUXGA(1920x1200)  
Transmit up to 1000m (3300 feet) at 1280 x 1024 by multi-mode SC Type one fiber optic cable  
Transmit up to 500m (1650 feet) at 1920 x 1200 by multi-mode SC Type one fiber optic cable  
TMDS video signal and EDID data is transmitted by 1 channel multimode optical fiber  
HDCP support by DDC channel  
Supports 12Bit Deep Color  
Small size for insertion into internal system  
Optional external power supply (Automatic power switch is included.)  
1.5 Package Contents  
Before you start the installation of the converter, please check the package contents.  
-
-
FO-HDM-1000M-EMI Transmitter  
FO-HDM-1000M-EMI Receiver  
x 1  
x 1  
-
User’s Manual  
x 1  
1.6 Before Installation  
Put the product in an even and stable location. If the product falls down or drops, it may cause an  
injury or malfunction.  
Don’t place the product in too high temperature (over 50°C), too low temperature (under 0°C) or high  
humidity.  
Use the DC power adapter with correct specifications. If inappropriate power supply is used then it  
may cause a fire.  
Do not twist or pull by force ends of the optical cable. It can cause malfunction.  
4
 
       
1.7 Installation  
Avenview FO-HDM-1000M-EMI is composed of a Transmitter converting the graphic signal of a computer to  
optical and Optical Fiber propagating the optical signal and Receiver supplying electrical signal to monitor  
converted from the optical signal to electrical signal. The Transmitter should be connected to computer and  
the Receiver should be connected to a monitor.  
Avenview FO-HDM-1000M-EMI is designed to self-detect the resolution of the monitor and change the  
resolution accordingly. Follow these steps for connecting to a device:  
To setup Avenview FO-HDM-1000M-EMI follow these steps for connecting to a device:  
1. Power on your display  
2. Connect Transmitter to the PC and Receiver to the Display.  
3. Connect the optical fiber between Transmitter and Receiver.  
4. Restart the computer.  
Use the DC power adapter (optional) with correct specification. The Transmitter which is connected to a  
computer uses power from the computer.  
Do not twist or pull by force the both ends of the optical cable. It may cause malfunction  
5
 
 
Section 2: Specifications  
Item  
Description  
FO-HDM-1000M-EMI (Transmitter)  
HDMI Transmitter over Fiber Optic  
HDMI 1.3a  
HDCP 1.1  
FO-HDM-1000M-EMI (Receiver  
Units  
HDMI Receiver over Fiber  
Unit Description  
HDMI Compliance  
HDCP Compliance  
Video Bandwidth  
2.25 Gbps / Channel  
WUXGA 1920 x 1200 @ 500 meters ( 1650 feet)  
UXGA 1600 x 1200 @ 700 meters (2300 feet)  
SXGA 1280 x 1024 @ 1000 meters (3300 feet)  
Supported Resolution &  
Distance  
4 Ch 850 nm Transmit OSA  
4 Ch 850 nm Transmit OSA  
911nm, 1 Ch VCSEL  
911nm, 1 Ch VCSEL  
Optical Converter  
980nm, 1 Ch PIN P/D Diode  
980nm, 1 Ch PIN P/D Diode  
HDMI A Type Plug  
HDMI Connector  
Optical Connector  
Fiber Type  
1 SC Connector  
50/125 µm Multi-mode glass fiber  
1.0W (max)  
0.75W (max)  
Power Consumption  
Power Supply  
100 ~ 240V 5V 2A DC  
10.7” x 1.2” x 0.5”  
Dimensions (L x W x H)  
Environmental  
32˚ ~ 104˚F (0˚ to 40˚C)  
-4˚ ~ 140˚F (-20˚ ~ 60˚C)  
Operating Temperature  
Storage Temperature  
Relative Humidity  
20~90% RH (no condensation)  
2.1 Case Dimensions  
6
 
   
2.2 Absolute Maximum Ratings  
Parameter  
Symbol Minimum Maximum Units  
Power Supply  
VCC  
VOT  
VST  
-0.3  
0
5.5  
50  
70  
80  
V
°C  
°C  
RH  
Operating Temperature  
Storage Temperature  
Relative Humidity  
-20  
10  
HRH  
Stresses greater than those listed under “Absolute Maximum Ratings” may cause  
permanent damage to the device. This is a stress rating only and functional operation of  
the device at these or any other conditions above those indicated in the operations section  
for extended periods of time may affect reliability.  
2.3 Signal Pin Assignment  
Transmitter / Receiver  
Pin  
1
Signal Assignment  
T.M.D.S. Data2+  
Pin  
11  
12  
13  
14  
15  
16  
17  
18  
19  
Signal Assignment  
T.M.D.S Clock Shield  
T.M.D.S Clock -  
CEC  
2
T.M.D.S. Data2 Shield  
T.M.D.S. Data2-  
3
4
T.M.D.S. Data1+  
No Connect  
SCL  
5
T.M.D.S. Data1 Shield  
T.M.D.S. Data1-  
6
DSA  
7
T.M.D.S. Data0+  
DDC/CEC Ground  
+5V Power  
8
T.M.D.S. Data1 Shield  
T.M.D.S. Data0-  
9
Hot Plug Detect  
10  
T.M.D.S Clock +  
7
 
   
2.4 Optical Fiber Cable  
The construction of 4 Optical Fibers and 4 Copper wires cable shall be in accordance with Figure and  
Table below:  
8
 
 
Disclaimer  
While every precaution has been taken in the preparation of this document, Avenview Inc. assumes no liability with respect to the  
operation or use of Avenview hardware, software or other products and documentation described herein, for any act or omission of  
Avenview concerning such products or this documentation, for any interruption of service, loss or interruption of business, loss of  
anticipatory profits, or for punitive, incidental or consequential damages in connection with the furnishing, performance, or use of the  
Avenview hardware, software, or other products and documentation provided herein.  
Avenview Inc. reserves the right to make changes without further notice to a product or system described herein to improve reliability,  
function or design. With respect to Avenview products which this document relates, Avenview disclaims all express or implied warranties  
regarding such products, including but not limited to, the implied warranties of merchantability, fitness for a particular purpose, and  
non-infringement.  
9
 

Accusplit Heart Rate Monitor 605XE User Manual
Acu Rite Weather Radio 01098CDI User Manual
Adaptec Network Card AUA 3020 User Manual
Airlink101 Network Card AWLH6070 User Manual
Alliance Laundry Systems Washer FLW700C User Manual
Amana Washer Dryer LE4307 User Manual
Ask Proxima Projector Pro AV 9410 User Manual
Asus Cell Phone V66 User Manual
Avery Printer 9460 User Manual
Avital Remote Starter 3001 User Manual