Avenview TV Cables FO HDMI SET User Manual

HDMI Extender over Fiber Optic  
User’s Guide  
Models  
FO-HDMI-SET  
© 2008 Avenview Inc. All rights reserved.  
The contents of this document are provided in connection with Avenview Inc. (“Avenview”) products. Avenview makes no representations  
or warranties with respect to the accuracy or completeness of the contents of this publication and reserves the right to make changes to  
specifications and product descriptions at any time without notice. No license, whether express, implied, or otherwise, to any intellectual  
property rights is granted by this publication. Except as set forth in Avenview Standard Terms and Conditions of Sale, Avenview assumes  
no liability whatsoever, and disclaims any express or implied warranty, relating to its products including, but not limited to, the implied  
warranty of merchantability, fitness for a particular purpose, or infringement of any intellectual property right.  
Reproduction of this manual, or parts thereof, in any form, without the express written permission of Avenview Inc. is strictly  
prohibited.  
1
 
Section 1: Getting Started  
1.1 Important Safeguards  
Please read all of these instructions carefully before you use the device. Save this manual for future  
reference.  
What the warranty does not cover  
Any product, on which the serial number has been defaced, modified or removed.  
Damage, deterioration or malfunction resulting from:  
Accident, misuse, neglect, fire, water, lightning, or other acts of nature, unauthorized  
product modification, or failure to follow instructions supplied with the product.  
Repair or attempted repair by anyone not authorized by us.  
Any damage of the product due to shipment.  
Removal or installation of the product.  
Causes external to the product, such as electric power fluctuation or failure.  
Use of supplies or parts not meeting our specifications.  
Normal wear and tear.  
Any other causes which does not relate to a product defect.  
Removal, installation, and set-up service charges.  
1.2 Safety Instructions  
Do not dismantle the housing or modify the module.  
Dismantling the housing or modifying the module may result in electrical shock or burn.  
Refer all servicing to qualified service personnel.  
Do not attempt to service this product yourself as opening or removing housing may expose you to  
dangerous voltage or other hazards  
Keep the module away from liquids.  
Spillage into the housing may result in fire, electrical shock, or equipment damage. If an object or liquid  
falls or spills on to the housing, unplug the module immediately.  
Have the module checked by a qualified service engineer before using it again.  
1.3 Regulatory Notices Federal Communications Commission (FCC)  
This equipment has been tested and found to comply with Part 15 of the FCC rules. These limits are designed  
to provide reasonable protection against harmful interference in a residential installation.  
Any changes or modifications made to this equipment may void the user’s authority to operate this  
equipment.  
3
 
       
1.4 Introduction  
Avenview FO-HDMI-SET consists of a Transmitter and Receiver that lets you extend HDMI signal from DVD  
Player, Blu-ray Player Set-top box, console systems or other video equipments over fiber optical signal without  
any signal degradation.  
-
-
-
-
-
-
-
High Speed and long distance transmission by Optical fiber (LC type Multi-Mode 4-ch fiber.  
Extends up to 100 meters (330 feet)  
Compatible with HDMI 1.3 Standard  
Backward compatibility with DVI Standard 1.0  
Supports HDCP compliant device  
Supports up to 1080p for HDTV and UXGA (1600 x 1200) resolution  
DDC and DEC signal line is transmitted by copper line (CAT5) between internal and external power  
1.5 Package Contents  
Before you start the installation of the converter, please check the package contents.  
-
-
-
-
-
Receiver  
Transmitter  
Power Adapter (+5VDC, 1.2A)  
Copper male to male HDMI Cable (-.5m)  
x 1  
x1  
x1  
x2  
User’s Manual  
1.6 Before Installation  
Put the product in an even and stable location. If the product falls down or drops, it may cause an  
injury or malfunction.  
Don’t place the product in too high temperature (over 50°C), too low temperature (under 0°C) or high  
humidity.  
Use the DC power adapter with correct specifications. If inappropriate power supply is used then it  
may cause a fire.  
Do not twist or pull by force ends of the optical cable. It can cause malfunction.  
4
 
     
1.7 Installation  
To setup Avenview FO-HDMI-SET follow these steps for connecting to a device:  
1. Power off display source such as DVD Player, Set-top box  
2. Connect the enclosed copper HDMI cable into each display source and display  
3. Connect copper HDMI cable which is attached to display source into FO-HDMI-SET Transmitter  
4. Connect Transmitter to the HDMI cable (course) and Receiver to HDMVI Cable (display)  
5. Connect the Optical cable (4ch-LC standard connector) between Transmitter and Receiver by order  
no 1, 2, 3, 4  
6. Connect the UTP cable (RJ45 connector) for DDC  
7. Power on the source and display (check the LED light on of Transmitter and Receiver)  
If there is no LED light on, insert the enclosed external power adapter into  
Transmitter.  
1.8 General Troubleshooting  
Problem  
Possible Solution  
Check if connection to the computer and the monitor are  
correct.  
No Image  
Check length of the cable between Transmitter and Receiver  
This product supports up to UXGA resolution.  
Check the DVI connection  
Screen Defects Appear  
Check the maximum resolution range of the graphics card.  
5
 
   
Section 2: Specifications  
Item  
Description  
165MHz (Single Link)  
1 Single Link HDMI  
1 HDMI Type A Receptacle  
1 Single Link HDMI  
5V 1.2A DC  
Video Bandwidth  
Video Input  
Input Connector  
Video Output  
Power  
0.55Watt  
Power Consumption  
Output Connector  
1HDMI Type A Receptacle  
Up to 1080p  
UXGA 1600 x 1200 @ 60Hz  
Maximum Supported  
Resolution  
Maximum Cable  
Length  
100 meters (330 feet)  
Optical  
850nm VCSEL  
PIN Photo Diode  
Multi-Mode Fiber  
Optical Source  
O/E Converter  
Fiber Type  
Environmental  
Operation  
0˚ to 50˚C Degree  
2.1 Signal Pin Assignment  
Pin  
Signal  
Pin  
Signal  
1
3
5
7
9
11  
13  
15  
17  
19  
TMDS Data 2+  
TMDS Data 2-  
TMDS Data 1 Shield  
TMDS Data 0+  
TMDS Data 0-  
TMDS Clock Shield  
CEC  
2
4
6
TMDS Data2 Shield  
TMDS Data 1+  
TMDS Data 1-  
TMDS Data0 Shield  
TMDS Clock+  
8
10  
12  
14  
16  
18  
TMDS Clock-  
Reserved (N.C. on device)  
SDA  
SCL  
DDC/CEC Ground  
Hot Plug Detect  
+5V Power  
6
 
   
Disclaimer  
While every precaution has been taken in the preparation of this document, Avenview Inc. assumes no liability with respect to the  
operation or use of Avenview hardware, software or other products and documentation described herein, for any act or omission of  
Avenview concerning such products or this documentation, for any interruption of service, loss or interruption of business, loss of  
anticipatory profits, or for punitive, incidental or consequential damages in connection with the furnishing, performance, or use of the  
Avenview hardware, software, or other products and documentation provided herein.  
Avenview Inc. reserves the right to make changes without further notice to a product or system described herein to improve reliability,  
function or design. With respect to Avenview products which this document relates, Avenview disclaims all express or implied warranties  
regarding such products, including but not limited to, the implied warranties of merchantability, fitness for a particular purpose, and  
non-infringement.  
7
 

3Com Water System ENTERPRISE OS 113 User Manual
Abocom Network Card PCMCIA User Manual
Abocom Network Router WAP404 User Manual
Acer Personal Computer R3610 User Manual
ADTRAN Network Router 3430 User Manual
Alpine Microphone CDE 9873 User Manual
Atlona Switch AT HDVS TX User Manual
Audiovox Automobile Electronics AA RS30CS User Manual
Audiovox Remote Starter 128 7853 User Manual
Avery Printer 9493 User Manual