Avenview TV Cables HDM C5 3 R User Manual

HDMI 1.3 Receiver over Signal  
CAT5/CAT6  
Model #: HDM-C5-3-R  
© 2010 Avenview Inc. All rights reserved.  
The contents of this document are provided in connection with Avenview Inc. (“Avenview”) products. Avenview makes no representations or warranties with  
respect to the accuracy or completeness of the contents of this publication and reserves the right to make changes to specifications and product descriptions at any  
time without notice. No license, whether express, implied, or otherwise, to any intellectual property rights is granted by this publication. Except as set forth in  
Avenview Standard Terms and Conditions of Sale, Avenview assumes no liability whatsoever, and disclaims any express or implied warranty, relating to its products  
including, but not limited to, the implied warranty of merchantability, fitness for a particular purpose, or infringement of any intellectual property right.  
Reproduction of this manual, or parts thereof, in any form, without the express written permission of Avenview Inc. is strictly prohibited.  
 
Section 1: Getting Started  
1.1 Important Safeguards  
Please read all of these instructions carefully before you use the device. Save this manual for future  
reference.  
What the warranty does not cover  
Any product, on which the serial number has been defaced, modified or removed.  
Damage, deterioration or malfunction resulting from:  
Accident, misuse, neglect, fire, water, lightning, or other acts of nature, unauthorized  
product modification, or failure to follow instructions supplied with the product.  
Repair or attempted repair by anyone not authorized by us.  
Any damage of the product due to shipment.  
Removal or installation of the product.  
Causes external to the product, such as electric power fluctuation or failure.  
Use of supplies or parts not meeting our specifications.  
Normal wear and tear.  
Any other causes which does not relate to a product defect.  
Removal, installation, and set-up service charges.  
1.2 Safety Instructions  
The HDM-C5-3-R, HDMI 1.3 Receiver over Signal CAT5 has been tested for conformance to safety regulations  
and requirements, and has been certified for international use. However, like all electronic equipments, the  
HDM-C5-3-R should be used with care. Read the following safety instructions to protect yourself from possible  
injury and to minimize the risk of damage to the unit.  
Do not dismantle the housing or modify the module.  
Dismantling the housing or modifying the module may result in electrical shock or burn.  
Refer all servicing to qualified service personnel.  
Do not attempt to service this product yourself as opening or removing housing may expose you to  
dangerous voltage or other hazards  
Keep the module away from liquids.  
Spillage into the housing may result in fire, electrical shock, or equipment damage. If an object or liquid  
falls or spills on to the housing, unplug the module immediately.  
Have the module checked by a qualified service engineer before using it again.  
Do not use liquid or aerosol cleaners to clean this unit. Always unplug the power to the device before  
cleaning.  
3
 
     
1.3 Regulatory Notices Federal Communications Commission (FCC)  
This equipment has been tested and found to comply with Part 15 of the FCC rules. These limits are designed  
to provide reasonable protection against harmful interference in a residential installation.  
Any changes or modifications made to this equipment may void the user’s authority to operate this  
equipment.  
1.4 Introduction  
The Avenview HDM-C5-3-R HDMI 1.3 Receiver over Single CAT5 Extender boosts up your video/audio  
transmission distance up to 60m (200ft) in HDTV 1080i format, 40m (130ft) in HDTV 1080p format, and 20m  
(65ft) in HDTV 1080p with 36 bit color depth. With only one cost effective LAN cable, users can easily extend  
HDTV sources from DVD players, Blu-ray Disc player, PS3, PC, and any other HDMI sources compliant with  
TMDS to distant display monitors including HDMI/DVI enabled TV sets or LCD PC monitors. With the  
state-of-the-art Silicon Image chipsets equipped, deep color video, DTS-HD or Dolby TrueHD audio, and HDCP  
supports and compatibility are all further insured. This flexibility makes HDCP compliant DVD players or PS3  
transmit utmost high quality video and audio with a greater distance at the minimal cost, when integrating  
several components apart.  
The Receiver (HDM-C5-3-R) equalizes the sent TMDS multimedia data from Transmitter (HDM-C5-3-S /  
HDM-C5XD-S / HDM-C5XD-SR). The transmission distance between the sending and receiving units can be up  
to 60m (200ft) under HD (720p/1080i) or 40m (130ft) under Full HD (1080p). With an 8-level equalization  
control knob on the receiving unit, users can adjust the equalization strength to the received TMDS signals  
accordingly, and therefore optimize the transmission distance between source and destination.  
-
Silicon Image chipset embedded for best compatibility and reliability HDMI video input supports up to  
1080p resolution  
-
-
-
HDMI 1.3c Compliant  
HDCP 1.1 compliant  
Extend the transmission length up to 60m (200ft) from the HDMI sources under HD resolution (1080i  
or 720p at 8 bit color depth)  
-
-
Extend the transmission length up to 40m (130ft) from the HDMI sources under Full HD resolution  
(1080p at 8 bit color depth)  
Extend the transmission length up to 20m (65ft) from the HDMI sources under Full HD resolution  
(1080p at 12 bit color depth)  
-
-
-
-
-
Minimize the cable skew by adjustable 8-level equalization control  
Pure unaltered uncompressed 7.1ch digital HDMI over LAN cable transmission  
DTS-HD and Dolby True HD high bit rate audio support  
Allows cascading  
Perfectly integrated with other HDM-C5-3 Series products  
4
 
   
1.5 Package Contents  
Before you start the installation of the converter, please check the package contents.  
-
-
-
HDM-C5-3-R  
Power Adapter (+5VDC, 4A)  
User’s Manual  
x 1  
x 1  
x 1  
1.6 Before Installation  
Put the product in an even and stable location. If the product falls down or drops, it may cause an  
injury or malfunction.  
Don’t place the product in too high temperature (over 50°C), too low temperature (under 0°C) or high  
humidity.  
Use the DC power adapter with correct specifications. If inappropriate power supply is used then it  
may cause a fire.  
Do not twist or pull by force ends of the optical cable. It can cause malfunction.  
5
 
   
1.7 Panel Description  
FRONT PANEL (Transmitter, HDM-C5-3-S)  
Mode  
HDMI-IN  
1. Rotary Switch  
2. HDMI Input  
DIP SWITCH  
0
1
2
3
4
5
6
7
HDMI Mode with Surround Sound Audio Output  
HDMI mode with Stereo Audio Output  
DVI Mode  
Reserved  
Reserved  
Reserved  
Use Default EDID  
Learn EDID From the Display  
Note for EDID (Extended Display Identification Data) learning  
1. Please connect the display which you want to read EDID with a HDMI cable to the transmitter’s  
HDMI-IN and turn Mode to 7 so the TX can learn the EDID information from the connected HDTV.  
The LED on the RJ45-OUT of TX will dim and light again in a few seconds, which indicates the EDID  
learning process is completed.  
2. Turn Mode clockwise from Mode 7 to Mode 0 or Mode 1 for desirable audio setting and enjoy the  
experience. DO NOT let the rotary arrow pass by Mode 6 which will erase the EDID just learned and  
restore the default EDID.  
6
 
 
REAR PANEL (Transmitter, HDM-C5-3-S)  
+5V DC  
RJ45-OUT  
1. 5V 4A DC Power Connector  
2. RJ45 Out  
FRONT PANEL (Receiver, HDM-C5-3-R)  
EQ  
HDMI-OUT  
1. Rotary Switch  
2. HDMI Out  
EQ: Adjust the 8-level equalization control knob to the received HDMI signals.  
0 7 = Strongest Weakest.  
It is recommended to switch from 7 to 0 to find the optimal visual experience.  
REAR PANEL (Receiver, HDM-C5-3-R)  
+5V DC  
RJ45-IN  
1. 5V 4A DC Power Connector  
2. RJ45 In  
7
 
1.8 Installation  
To setup Avenview HDM-C5-3-R with HDM-C5-3-S follow these steps for connecting to a device:  
1. Connect your HDMI/DVI source (such as a Blu-ray Disc player) to Transmitter (HDM-C5-3-S).  
2. Connect your HDMI/DVI display (such as a LCD TV) to the receiving unit HDM-C5-3-R.  
3. Connect your CAT-5/5e/6 LAN cable between the transmitting and receiving units.  
4. Make sure CAT-5/5e/6 LAN cable is tightly connected and not loose.  
5. Plug in 5V DC power cord to the power jack of the receiving unit HDM-C5-3-R.  
6. Plug in 5V DC power cord to the power jack of the transmitting unit HDM-C5-3-S.  
If a flickering or a blinking image is seen, try to adjust the rotational switch to improve the cable  
skew. 0 stands for the strongest EQ while 7 stands for the weakest. Try adjusting the EQ from 7 to 0  
1.9 EDID Learning  
To learn EDID from the monitor/TV following these steps  
1. Turn on HDM-C5-3-S.  
2. Turn the Mode of HDM-C5-3-S counterclockwise from 0 (for surround sound) or 1 (for stereo) to 7.  
3. Use a HDMI cable to connect HDM-C5-3-S & the display (better not connect to video source). The LED  
on the RJ-45 of HDM-C5-3-S will dim and light again, which indicates the EDID learning process is  
finished.  
4. Turn the Mode of HDM-C5-3-S clockwise from 7 to 0 (for surround sound) or 1 (for stereo).  
5. Connect HDM-C5-3-S and the video source through a HDMI cable and enjoy the experience.  
The most important thing is don’t let the rotary arrow pass through 6 which will erase the EDID just  
learned and restore to default EDID.  
8
 
   
1.10 General Troubleshooting  
Problem  
Possible Solution  
Check if connection to the source and the display are correct.  
Ensure that display device supports 480p, 720p and 1080p  
resolution  
No Image  
This product supports up to 1080p (1920x1200) resolution.  
Check the DVI and HDMI connection  
If outputting from a PC. Check the maximum resolution range  
of the graphics card.  
Screen Defects Appear  
Section 2: Specifications  
Item  
Description  
HDM-C5-3-S  
HDM-C5-3-R  
Units  
HDMI 1.3 Transmitter  
HDMI 1.3 Receiver  
Unit Description  
HDMI Compliance  
HDCP Compliance  
Video Bandwidth  
Supported Resolutions  
HDMI 1.3c  
Yes  
Single Link 340 MHz (10.2Gbps)  
480i / 480p / 720p / 1080i / 1080p60  
Full HD: (1080p) ~40meter (130feet) (CAT5e) / 50meter (165feet) (CAT6)  
HD: (720p/1080i)-50meter (165feet) (CAT5e) / 60meter (200feet) (CAT6)  
Resolution and Distance  
(8-bit)  
Surround Sound (up to 7.1 Ch) or Stereo Digital Audio  
Audio Support  
Equalization  
-
8 Level Digital Control  
1.2 Volts (peak-to-peak)  
5 Volts (peak-to-peak, TTL)  
Input TMDS Signal  
Input DDC Signal  
-
-
Human body model ±15kV (air-gap discharge) & ±8kV (contact discharge)  
Core chipset ±8kV  
ESD Protection  
1 x HDMI  
1 x RJ45  
1 x RJ45  
Input  
1 x HDMI  
Output  
Type A (19 pin female)  
HDMI Connector  
RJ45 Connector  
Rotary Switch  
Dimensions  
WE/SS 8P8C with 2 LED indicators  
Mode  
EQ  
3.3” X 2.4” x 1” (L x W x H)  
5V 4A DC  
Power Supply  
1 Watt (max)  
Power Consumption  
Environmental  
Operating Temperature  
Storage Tempearture  
Relative Humidity  
32˚ ~ 104˚F (0˚ to 40˚C)  
-4˚ ~ 140˚F (-20˚ ~ 60˚C)  
20~90% RH (no condensation)  
9
 
   
Disclaimer  
While every precaution has been taken in the preparation of this document, Avenview Inc. assumes no liability with respect to the  
operation or use of Avenview hardware, software or other products and documentation described herein, for any act or omission of  
Avenview concerning such products or this documentation, for any interruption of service, loss or interruption of business, loss of  
anticipatory profits, or for punitive, incidental or consequential damages in connection with the furnishing, performance, or use of the  
Avenview hardware, software, or other products and documentation provided herein.  
Avenview Inc. reserves the right to make changes without further notice to a product or system described herein to improve reliability,  
function or design. With respect to Avenview products which this document relates, Avenview disclaims all express or implied warranties  
regarding such products, including but not limited to, the implied warranties of merchantability, fitness for a particular purpose, and  
non-infringement.  
10  
 

3Com Switch 3CRWX120695A WXR100 User Manual
Acoustic Energy Home Theater System A Ego 5 User Manual
Adder Technology Power Supply AV4USB MAC User Manual
Agilent Technologies Stereo System N9030a User Manual
Agri Fab Lawn Mower 45 02881 User Manual
Alcatel Lucent Network Card Digital Home Care Solution User Manual
Aluratek Network Card AVH100F User Manual
Audiovox Car Stereo System AVDINPC User Manual
Avenview TV Converter Box DVI VIDEOWALL 4 User Manual
Axis Communications Security Camera M1034 W User Manual